Page 1 of 1
NUCAPS v2.0., testdata problem
Posted: Thu Jun 28, 2018 3:54 am
by zion0210
Hi colleguases,
The calculation of test data ended next mesage:
Code: Select all
Running ... NUCAPS_Preproc.pl for swath_001 granule_001
WARNING: NUCAPS_Preproc.pl failed for $CSPP_NUCAPS_HOME/test/TMP_OPoq8O/swath_001/granule_001 at $CSPP_NUCAPS_HOME/CSPP_NUCAPS_2_0/scripts/nucaps_granule.pl line 119.
INFO: This fail can occur if trying to process missing FOVs'
My OS is debian 9, kernel 4.9.0.6-amd64.
What i may do to this problem?
Regards,
zion0210
Re: NUCAPS v2.0., testdata problem
Posted: Thu Jun 28, 2018 10:06 am
by jimd
Please can you post the exact command line you used. I am a bit confused about the error message. If you get this message at all, it should look like, for example:
WARNING: NUCAPS_Preproc.pl failed for /data/jimd/CSPP_NUCAPS_2_0/work/TMP_Wx_NIP/swath_001/granule_001 at /data/jimd/CSPP_NUCAPS_2_0/scripts/nucaps_granule.pl line 119.
I suspect you swapped in $CSPP_NUCAPS_HOME for (your version of) /data/jimd/CSPP_NUCAPS_2_0 when you sent in the report, yes? But made a mistake when you swapped it in the last part of the message, i.e. $CSPP_NUCAPS_HOME/CSPP_NUCAPS_2_0/scripts/nucaps_granule.pl
To help me resolve, please can you re-run with the --noclean switch and tar up the temporary working directory and put it somewhere I can fetch it. If you still have directory TMP_OPoq8O, just tar that up.
Our supported platform is CentOS6. I also tested on CentOS7. So this may be a problem I cannot resolve for you. A common source for problems is system incompatibility in the dynamic libraries provided in $CSPP_NUCAPS_HOME/lib/. Replacing some or all of those with versions known to work on your system may resolve.
-jim (for CSPP team).
Re: NUCAPS v2.0., testdata problem
Posted: Thu Jun 28, 2018 11:37 am
by zion0210
Hi, Jim.
Thank for you clue.
The problem was in lack of libcurl.so.4, package libcurl3.
Also needed install lftp, uuid-runtime and glibc.
May be, this info should be includet in installation guid.
I report about result, after testing my DB data.
Regards,
zion0210
Re: NUCAPS v2.0., testdata problem
Posted: Thu Jun 28, 2018 12:56 pm
by jimd
Hi zion0210,
Thanks for your feedback. That is very useful to know.
lftp should definitely be added to System Requirements, and libcurl.so put (& tested) in $CSPP_NUCAPS_HOME/lib/
uuid-runtime and glibc I think I would normally to expect to be installed, but they would be good to note in a new section called "Troubleshooting".
Cheers,
-jim.
Re: NUCAPS v2.0., testdata problem
Posted: Sat Jun 30, 2018 8:16 am
by zion0210
Hi, Jim.
The test of processing DB data is successful.
Can i ask several questions about work NUCAPS v 2.0 here?
Or, better, create new topic? Or send email?
Regards,
zion0210
Re: NUCAPS v2.0., testdata problem
Posted: Sat Jun 30, 2018 10:52 am
by jimd
Hi zion0210,
I think best to send me an email:
jdavies@wisc.edu
Cheers,
-jim.
Re: NUCAPS v2.0., testdata problem
Posted: Sun Dec 12, 2021 6:24 am
by namaz123
Hi, Jim.
Thank for you clue.
The problem was in lack of libcurl.so.4, package libcurl3.
Also needed install lftp, uuid-runtime and glibc.
May be, this info should be includet in installation guid.
I report about result, after testing my DB data.
Re: NUCAPS v2.0., testdata problem
Posted: Mon Dec 13, 2021 12:20 pm
by kathys
Hello,
We appreciate the feedback. The package that you reference, NUCAPS Version 2.0, is an older version now.
The NUCAPS software has been replaced by the NOAA Hyper-Spectral Enterprise Algorithm Package (HEAP) package, which produces NUCAPS retrievals for a number of different satellite/sensor combinations.
Please see the CSPP website for more information about HEAP.
Kathy